Yayınlar

Touraj Farsadi, Altan Kayran, Classical Flutter Analysis of Composite Wind Turbine Blades Including Compressibility, Wind Energy Journal, Accepted: 23 July 2020 DOI: 10.1002/we.2559.

Farsadi, T., Rahmanian, M., Kayran, A., "Reduced order nonlinear aeroelasticity of swept composite wings using compressible indicial unsteady aerodynamics", Journal of Fluids and Structures, Vol. 92, 2020.

Farsadi, T., Rahmanian, M., Kayran, A., "Geometrically Nonlinear Aeroelastic Behaviour of Pretwisted Composite Wings Modeled as Thin Walled Beams, Journal of Fluids and Structures", Vol. 83, pp. 259-292, 2018.

Altan Kayran, Özgün Şener, Touraj Farsadi, M. Ozan Gözcü, "Evaluation of the effect of spar cap angle of bending-torsion coupled blades on the aero-structural performance of wind turbines", Journal of Solar Energy Engineering, 2018.

Altan Kayran, Özgün Şener, "Structural Performance and Power Production of Wind Turbine Systems with Bend Twist Coupled Blades in Underrated Wind Conditions", AIAA Science and Technology Forum and Exposition, AIAA SciTech 2018.

Özgür Yalçın, Kenan Cengiz, Yusuf Özyörük, "High-order detached eddy simulation of unsteady flow around NREL S826 airfoil", Journal of Wind Engineering and Industrial Aerodynamics, Volume 179, August pages 125-134, 2018.

Sener, O., Farsadi, T., Gozcu, M.O., Kayran, A. "Evaluation of the Effect of Spar Cap Fiber Angle of Bending-Torsion Coupled Blades on the Aero-Structural Performance of Wind Turbines" Journal of Solar Energy Engineering, 2018

M.A. Mueller et al. "Improving the Thermal Performance of Rotary and Linear Air-Cored Permanent Magnet Machines for Direct Drive Wind and Wave Energy Applications" IEEE Transactions on Energy Conversion, 2018.

Çınar, O., Erdal M., Kayran, A., Accurate Equivalent Models of Sandwich Laminates with Honeycomb Core and Composite Face Sheets via Optimization Involving Modal Behavior, Journal of Sandwich Structures and Materials, Vol. 19(2) pp. 139-166, DOI:10.1177/1099636215613934, 2017.

Çiçek, K.F., Erdal M., Kayran, A., Experimental and Numerical Study of Process-Induced Total Spring-in of Corner-Shaped Composite Parts, Journal of Composite Materials, DOI: 10.1177/0021998316669993, Vol. 51(16), pp.2347-2361,2017.

Larsen, B. E., Fuhrman, D. R., Baykal, C., Sumer, B. M., "Tsunami-induced scour around monopile foundations" Coastal Eng. 129, 36-49. Volume 129, 2017.

Baykal, C., Sumer, B. M., Fuhrman, D. R., Jacobsen, N. G. and Fredsøe, J. "Numerical simulation of scour and backfilling processes around a circular pile in waves." Coast. Eng. 122, 87-107, doi:10.1016/j.coastaleng.2017.01.004, 2017.

Coskun, S., Hazaveh, H. A., Uzol, O., Kurc, O., "Experimental Investigation of Wake Flow Field and Wind Comfort Characteristics of Fractal Wind Fences," Journal of Wind Engineering and Industrial Aerodynamics, Vol. 168., pp. 32-47, 2017.

Magalhães D., Kazanç F., Riaza J., Erensoy S., Kabaklı Ö., Chalmers H., " Combustion of Turkish lignites and olive residue: Experiments and kinetic modelling", Fuel, Vol. 203, pp. 868-876, 2017.

Abdulrahim, A., Anik, E., Ostovan, Y., Uzol, O., 2016, "Effects of Tip Injection on the Performance and Near Wake Characteristics of a Model Wind Turbine Rotor," Renewable Energy, 2016, Volume 88: 73-82.

Ostovan, Y., and Uzol, O., "Experimental Study on the Effects of Winglets on the Performance of Two Interacting Horizontal Axis Model Wind Turbines," Journal of Physics: Conference Series, vol. 753, Sep. 2016, p. 22015.

Cinar, O., Erdal M., Kayran, A., Accurate Equivalent Models of Sandwich Laminates with Honeycomb Core and Composite Face Sheets via Optimization Involving Modal Behavior, accepted for publication in Journal of Sandwich Structures and Materials, DOI:10.1177/1099636215613934, 2015.

Cicek, K.F., Erdal M., Kayran, A., Experimental and Numerical Study of Process-Induced Total Spring-in of Corner-Shaped Composite Parts, accepted for publication in Journal of Composite Materials, DOI: 10.1177/0021998316669993, 2016.

C. Kaynak and Y. Meyva "Use of Maleic Anhydride Compatibilization to Improve Toughness and Other Properties of Polylactide Blended with Thermoplastic Elastomers", Polymers for Advanced Technologies, 25 (12) , 1622-1632 (December 2014).

Gözlüklü,B., Uyar, I., Çöker,D., "Intersonic Delamination in Curved Thick Composite Laminates under Quası-static loading", Mechanics of Materials, 2015, Volume 80: Part B: 163-182.

Amireghbalia, A., Coker D.. Elastic analysis of a circumferential crack in an isotropic curved beam using the modified mapping–collocation method. Journal of Computational and Applied Mathematics, July 2014, Volume 264: 131–138. (SCI)

Kaynak C., Sankal S.. Effects of oxidative functionalized and aminosilanized carbon nanotubes on the crystallization behaviour of polyamide-6 nanocomposites. Polymer Bulletin, 2014, 71(4): 855-873.

Shojaee, S.M.N.; Uzol, O.; Kurç Ö.. Atmospheric boundary layer simulation in a short wind tunnel. International Journal of Environmental Science and Technology, 2014, 11(1):59-68.

Elfarra, M. A.; Sezer-Uzol, N.; Akmandor, I. S.. NREL VI rotor blade: numerical investigation and winglet design and optimization using CFD. Wind Energy , 2014, 17 (4): 605-626.

Sankal, S., Kaynak, C., Using various techniques to characterize oxidative functionalized and aminosilanized carbon nanotubes for polyamide matrix, Journal of Reinforced Plastics and Composites, 2013, 32(2), pp. 75-86.

Sezer-Uzol, N.; Uzol, O., Effect of steady and transient wind shear on the wake structure and performance of a horizontal axis wind turbine rotor. Wind Energy, 2013, 16(1):1-17

Erdogan, A. R.; Kaygusuz, I.; Kaynak, C.. Influences of aminosilanization of halloysite nanotubes on the mechanical properties of polyamide-6 nanocomposites. Polymer Composites, 2013, 35(7):1350-1361.

Ozan Kesikbaş and Nilay Sezer-Uzol, "Aero-Elastik Açıdan Boyut Artışının Rüzgâr Türbin Kanadı Tasarımına Etkisinin İncelenmesi," YEKSEM 2019 10. Yenilenebilir Enerji Kaynakları Sempozyumu ve Sergisi, 12-14 December 2019, Antalya, Turkey.

Keriman Oğuz and Nilay Sezer Uzol, "Yatay Eksenli Rüzgar Türbini Kanadı ve Kanat Profillerinin BEM ve CST Metotları ve Genetik Algoritma Kullanarak Aerodinamik Optimizasyonu," 5. İzmir Rüzgâr Sempozyumu, 3-5 Ekim 2019, İzmir, Türkiye.

Ezgi Orbay Akcengiz and Nilay Sezer-Uzol, "Rüzgar Türbini Rotorları için Kalın Kanat Profillerinin HAD Simülasyonları," 5. İzmir Rüzgâr Sempozyumu, 3-5 Ekim 2019, İzmir, Türkiye.

Mustafa Şahin, İlkay Yavrucuk, "Rüzgâr Türbini Kanat Yunuslama Açısı Kontrolcüsü Tasarımı ve Performans Analizi", 5.İzmir Rüzgâr Sempozyumu 2019.

Miraç Onur Bozkurt, Demirkan Çöker, Levend Parnas, "Tabakalı Kompozitlerde Düşük Hızlı Darbeye Bağlı Hasarın Sayısal Olarak İncelenmesi", 5.İzmir Rüzgâr Sempozyumu 2019.

Can Muyan, Demirkan Çöker, "Kompozit Rüzgâr Türbini Kanadının Mukavemet Özelliklerinin Progresif Hasar Analizi Yardımıyla İyileştirilmesi", 5.İzmir Rüzgâr Sempozyumu 2019.

Siamak Pourkeivannour, H. Bülent Ertan, "Rüzgâr Enerji Dönüşümü Emülasyon Sistemi", 5.İzmir Rüzgâr Sempozyumu 2019.

A. Hazal Altuğ Yalçın, İlkay Yavrucuk, Oğuz Uzol, "Yatay Eksenli Rüzgâr Türbinleri İçin Gürbüz Tasarım Yöntemi", 5.İzmir Rüzgâr Sempozyumu 2019.

Baran Kaya, Elif Oğuz, "Tekil Kazık Temelli Açık Deniz Rüzgâr Türbinlerinin Avrupa'daki Gelişimi", 5.İzmir Rüzgâr Sempozyumu 2019.

Nejan Huvaj, Eray Caceoğlu, Yelaman Baidol,"Deniz Üstü Rüzgâr Türbinleri: Temel Tipi Seçimi ve Gerekli Deniz Tabanı Zemin Araştırmaları", 5.İzmir Rüzgâr Sempozyumu 2019.

Keriman Oğuz and Nilay Sezer-Uzol, "Aerodynamic Optimization of Horizontal Axis Wind Turbine Rotor by Using BEM, CST Method and Genetic Algorıthm," AIAC-2019-063, 10th Ankara International Aerospace Conference, 18-20 September 2019, METU, Ankara, TURKEY.

Başkaya A, Keysan O.," Modular Axial-Flux Direct Drive Permanent Magnet Generator for Wind Turbine Applications", Winercost – International Conference on Wind Energy Harvesting, 2018.

Temiz H.,Demirok E, Keysan O., Türkay A., Çetinkaya B., "Performance Comparison of Passive Series R and Shunt R-C Damped LCL Filter for Grid-Connected Inverters", IET International Conference on Renewable Power Generation, 2018.

Siamak Pourkeivannour, Bulent Ertan, "Accurate scale modeling for the dynamic behavior of a large wind turbine on a Wind Turbine Emulator", ECRES 2018 konferansı.

Erencan Duymaz, Siamak Pourkeivannour, DogaCeylan, Ilker Sahin, Ozan Keysan," Design of a Power Plant Emulator for the Dynamic Frequency Stability Studies", ICEM 2018 konferansı.

Özyıldız, M., Muyan, C., Çöker, D. "Strength Analysis of a Composite Turbine Blade Using Puck Failure Criteria" Conference: 7th Conference on Science of Making Torque from Wind (TORQUE) Location: Milan, ITALY Date: JUN 20-22, 2018.

Taşdemir, B., Çöker, D. "Damage Progression in Thick Curved Composite Laminates under Static and Fatigue Loading" Conference: 7th Conference on Science of Making Torque from Wind (TORQUE) Location: Milan, ITALY Date: JUN 20-22, 2018.

Atalay, O., Kayran, A. "Load Reduction in Wind Turbines with Bend-Twist Coupled Blades without Power Loss at Underrated Wind Speeds" Journal of Physics Conference Series, 2018.

Sener, O., Dede, O., Atalay, O., Atasoy, M., Kayran, A. "Determination of Transverse Shear Moduli of Composite Core Materials Through Sandwich Beam Tests" 12th International Conference on Sandwich Structures ICSS-12, 19-22 August 2018, EPFL, Switzerland.

Altuğ, H., Yavrucuk, I., Uzol, O."Robust Design Simulation for a Horizontal Axis Wind Turbine Rotor Design." Eawe PhD Seminar Brussel, Belgium 18-20 September 2018.

Bozkurt, M. O., Coker, D. & Parnas, L. "Simulation of Impact Induced Damage Process in a Carbon/Epoxy Composite Beam"ARF2018, Jeju, South Korea, Oct 30-Nov 1 2018.

Limon, A. U. & Coker, D. "Actuator Load Calculation Algorithm for a Multiaxial Test System of a Rotating Beam like Aerostructure" ARF2018, Jeju, South Korea, Oct 30-Nov 1 2018.

Tasdemir, B. & Coker, D. "Investigation of Static and Fatigue Failure Mechanisms on UD and Woven Curved Composite Laminates"ARF2018, Jeju, South Korea, Oct 30-Nov 1 2018.

Sener, O., Dede, O., Atalay, O., Atasoy, M., Kayran, A. "Evaluation of Transverse Shear Moduli of Composite Sandwich Beams Through Three-Point Bending Tests"IMECE2018-87636, Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition , November 9-15, 2018, Pittsburgh, PA, USA.

Yavuz, B. O., Parnas, L. & Coker, D. "Effect of lay-up orientation on fracture toughness of CFRP laminates" ARF2018, Jeju, South Korea, Oct 30-Nov 1 2018.

E. Duymaz, S. Pourkeivannour, D. Ceylan, I. Şahin and O. Keysan "Design of a Power Plant Emulator for the Dynamic Frequency Stability Studies" XIII International Conference on Electrical Machines (ICEM), Alexandroupoli, 2018, pp. 152-157.

A. Akgemci, R. Zeinali and O. Keysan "Minimization of EMF Harmonics and Cogging Torque for a Medium Speed RFPM Wind Turbine Generator" 7th International Conference on Renewable Energy Research and Applications (ICRERA), Paris, 2018, pp. 342-347.

Şener, Ö., Farsadi, T., Kayran, A., "Effect of Fibre Orientation of Bend-Twist Coupled Blades on the Structural Performance of the Wind Turbine System", AIAA 2017-1167, AIAA Science and Technology Forum and Exposition, AIAA SciTech 2017, 9-13 Ocak 2017, Grapevine, Teksas, ABD.

Orbay, E. , Bilgen S., Uzol, N., Ay, B., Ostovan Y. "Numerical and experimental investigation of aerodynamic loads for tall buildings with prismatic and twisted forms", The International Conference On Wind Energy Harvesting 2017, 20‐21 Nisan 2017, Coimbra, Portekiz.

Yalçın, Ö., Cengiz K., Özyörük Y., "High-order detached-eddy simulation of unsteady flow around NREL S826 airfoil", The International Conference On Wind Energy Harvesting 2017, 20‐21 Nisan 2017, Coimbra, Portekiz.

Altug H., Yavrucuk, I., "Dynamic modelling of a variable speed HAWT", The International Conference On Wind Energy Harvesting 2017, 20‐21 Nisan 2017, Coimbra, Portekiz.

Zeinali R., Ertan H. B., Yamalı C., Tarvirdilu R., "Magnetically geared direct drive wind generator thermal analysis", IEEE International Conference OPTIM –ACEMP 2017, May 2017, Brasov, Romanya.

Zeinali R., Keysan O., "A Novel Magnetic Geared Superconducting Generator Design for Direct-Drive Wind Turbines", JAPMED-10, Tenth Japanese-Mediterranean Workshop on Applied Electromagnetic Engineering for Magnetic, Superconducting, Multifunctional and Nano Materials, Haziran 2017, İzmir.

Sevine T., Leblebici, E., Kaya, M., Tuncer, İ.H., "Reconstruction of Atmospheric Flow Field and Wind Resource Estimation based on Proper Orthogonal Decomposition Method" Wind Energy Sicence Conference (WESC) 2017, 25-26 Haziran 2017, Lyngby, Danimarka.

Tasdemir B., Coker, D., "Fatigue and Static Failure of Curved Composite Laminates under Combined Moment/Axial Loading", Wind Energy Sicence Conference (WESC) 2017, 25-26 Haziran 2017, Lyngby, Danimarka.

Demir, B., Ataöv, A., "Wind energy production processes: What matters in Izmir, Turkey?" Wind Energy Sicence Conference (WESC) 2017, 25-26 Haziran 2017, Lyngby, Danimarka.

Farsadi, T., Kayran, A., "Aeroelastic stability and response analysis of bend-twist coupled composite wind türbine blades by considering compressibility effects", Wind Energy Sicence Conference (WESC) 2017, 25-26 Haziran 2017, Lyngby, Danimarka.

Ostovan, Y., Akpolat, M. T., Uzol, O., "Experimental Investigation of the Effects of Winglets on the Tip Vortex Behavior of a Model Horizontal Axis Wind Turbine using Particle Image Velocimetry", Wind Energy Sicence Conference (WESC) 2017, 25-26 Haziran 2017, Lyngby, Danimarka.

Hazaveh H. A., Uzol O., "Experimental Study on the Near Wake Flow Characteristics of Fractal Turbulence Grids" Wind Energy Sicence Conference (WESC) 2017, 25-26 Haziran 2017, Lyngby, Danimarka.

Atalay, O., Farsadi, T., Kayran, A., "Performance Study of Wind Turbines with Bend-Twist Coupled Blades at Underrated Wind Speeds", AIAC-2017-122, 9th Ankara International Aerospace Conference-AIAC, 20-22 Eylül 2017, METU, Ankara, Türkiye.

Şener, Ö., Farsadi, T., Kayran, A., "Türbin kanatlarında eğilme-burulma etkileşimi kullanarak rüzgar türbinlerinde yük azalımı sağlanması", 4. İzmir Rüzgâr Sempozyumu, 28-30 Eylül 2017, İzmir, Türkiye.

Farsadi, T., Şener, Ö., Kayran, A., "Free Vibration Analysis of Uniform and Asymmetric Composite Pretwisted Rotating Thin Walled Beam", IMECE2017-70531, Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition, 3-9 Kasım 2017, Tampa, Florida, ABD.

Anık E., Abdulrahim A., Ostovan Y., Mercan B., Uzol O., "Active control of the tip vortex: an experimental investigation on the performance characteristics of a model turbine", The Science of Making Torque from Wind 2014 (TORQUE 2014), 18-20 June 2014, Copenhag, Denmark.

Arca, M. A., Coker D., "Experimental investigation of CNT effect on curved beam strength and interlaminar fracture toughness of CFRP laminates", The Science of Making Torque from Wind 2014 (TORQUE 2014), 18-20 June 2014, Copenhag, Denmark.

Gözcü M.O., Kayran A., "Investigation of the effect of bending twisting coupling on the loads in wind turbines with superelement blade definition", The Science of Making Torque from Wind 2014 (TORQUE 2014), 18-20 June 2014, Copenhag, Denmark.

Gul M., Uzol O., Akmandor I. S., "An Experimental Study on Active Flow Control Using Synthetic Jet Actuators over S809 Airfoil", The Science of Making Torque from Wind 2014 (TORQUE 2014), 18-20 June 2014, Copenhag, Denmark.

Orhan Ö. E., Ahmet G., "A Comparative Study of virtual and operational met mast data", The Science of Making Torque from Wind 2014 (TORQUE 2014), 18-20 June 2014, Copenhag, Denmark.

Sargın H., Kayran A., "Comparison of transient and quasi-steady aeroelastic analysis of wind turbine blade in steady wind conditions", The Science of Making Torque from Wind 2014 (TORQUE 2014), 18-20 June 2014, Copenhag, Denmark

Türkal M., Novikov Y., Üşenmez S., Sezer-Uzol N., "Uzol O., GPU Based Fast Free-Wake Calculations For Multiple Horizontal Axis Wind Turbine Rotors", The Science of Making Torque from Wind 2014 (TORQUE 2014), 18-20 June 2014, Copenhag, Denmark.

Uyar I., Gozluklu B., Coker D., "Dynamic delamination in curved composite laminates under quasi-static loading", The Science of Making Torque from Wind 2014 (TORQUE 2014), 18-20 June 2014, Copenhag, Denmark.

Gözcü,M. O., Olgun,M. N., Kayran, A., "Investigation of the effect of off-axis spar cap plies on damage equivalent loads in wind turbines with superelement blade definition", AIAA Scitech 2014, 13-17 January 2014, Maryland, USA.

Çöker, D., Amireghbali, A., Yavaş, D., "Numerical and Experimental Investigation of Cracks in Curved Interfaces Between Identical Materials", IMECE2013-66406, ASME 2013 International Mechanical Engineering Congress & Exposition, 15-21 November 2013, San Diego, A.B.D.

Çöker, D., Kütükoğlu, B., Yavaş, D., "Experimental Investigation of Dynamic Slip Initiation and Propagation Between Polycarbonate Plates", IMECE2013-66409, ASME 2013 International Mechanical Engineering Congress & Exposition, 15-21 November 2013, San Diego, A.B.D.

Gözlüklü, B., Yavaş, D., Çöker, D., "Effect of Cohesive Zone Models on the Dynamic Delamination of Highly Curved Thick Unidirectional Composite Laminates", IMECE2013-66411, ASME 2013 International Mechanical Engineering Congress & Exposition, 15-21 November 2013, San Diego, A.B.D.

Çöker, D., Yavaş, D., Gözlüklü, B., Arca, M. A., Uyar, İ., "Effect of Thickness and Crack Size on the Dynamic Delamination of L-shaped Unidirectional Composite Laminates", IMECE2013-66597, ASME 2013 International Mechanical Engineering Congress & Exposition, 15-21 November 2013, San Diego, A.B.D.

Gözcü, M. O., Olgun, M. N., Kayran, A., "Effect of off-axis spar cap plies on the damage equivalent loads in wind turbines with super element blade definition", RZGM2013-12, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Gözcü, M. O., Olgun, M. N., Kayran, A., "Inverse design of a 3d reference wind turbine blade to study bending-twisting coupling effect in load alleviation", RZGM2013-8, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Gül, M., Uzol, O., Akmandor, İ. S., "An experimental study on active flow control over S809 airfoil using synthetic jet actuators", RZGM2013-39, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

İbrahimoğlu, C. S., Kayran, A., "Semi-geodesic winding of composite conical shells – possible application for composite towers", RZGM2013-3, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Kiliç., M. B., Kalaylioğlu, Z., "A Bayesian model of wind direction", RZGM2013-29, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Leblebici, E., Ahmet, G., Tuncer, İ. H., "Unsteady atmospheric turbulent flow solutions coupled with a mesoscale weather prediction model", RZGM2013-35, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Ostovan, Y., Uzol, O., "Aerodynamic characterization of NREL S826 airfoil at low Reynolds numbers", RZGM2013-42, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Özdede, S., Kurtuluş, D. F., Kurtuluş, B., "Wind Resource assessment and wind farm modeling in Bodrum Peninsula", RZGM2013-28, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Uyar, İ., Arca, M. A., Yavaş, D., Gözlüklü, B., Çöker, D., "Experimental investigation of delamination in L-shaped composite brackets", RZGM2013-44, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Yeniceli, S. C., Kayran, A., "Design optimization of a whiffletree system for static testing of a wind turbine blade", RZGM2013-17, Conference On Wind Energy Science and Technology RUZGEM 2013, 3-4 October 2013, Ankara, Turkey.

Ahmet, G., Leblebici, E., Tuncer, İ. H., "Terrain fitted turbulent flow solutions coupled with a mesoscale weather prediction model", 9th Ph.D. Seminar on Wind Energy In Europe, 18-20 September 2013, Gotland, İsveç.

Kiliç., M. B., Kalaylioğlu, Z., "A Bayesian model of wind direction", 9th Ph.D. Seminar on Wind Energy In Europe, 18-20 September 2013, Gotland, İsveç.

Gül, M., Uzol, O., Akmandor, İ. S., "An experimental study on active flow control over S809 airfoil using synthetic jet actuators", AIAC-2013-085, 7th Ankara International Aerospace Coference, 11-13 September 2013, Ankara, Turkey.

Leblebici, E., Ahmet, G., Tuncer, İ. H., "Wind potential estimations based on unsteady turbulent flow solutions coupled with a mesoscale weather prediction model", AIAC-2013-094, 7th Ankara International Aerospace Coference, 11-13 September 2013, Ankara, Turkey.

Leblebici, E., Ahmet, G., Tuncer, İ. H., "Atmospheric turbulent flow solutions coupled with mesoscale weather prediction model", 3rd South-East European Conference on Computational Mechanics on ECCOMAS and IACM Special Interest Conference SEECM III, 12-14 Haziran 2013, Kos Adasi, Yunanistan.

Uyar, I., Yavas, D., Gozluklu, B., Coker, D., "Experimental investigation of delamination in L-shaped composite brackets", 2013 SEM Annual Conference and Exposition on Experimental and Applied Mechanics.

Yavas, D., Kutukoglu, B., Coker, D., "Experimental setup to investigate dynamic slip initiation and propagation between polycarbonates plates", 2013 SEM Annual Conference and Exposition on Experimental and Applied Mechanics.

Yavas, D., Gozluklu, B., Coker, D., "Investigation of crack growth along curved interfaces in L- shaped composites and polymers", 2013 SEM Annual Conference and Exposition on Experimental and Applied Mechanics.

Orhan, Ö. E., Ahmet, G., Yildiz, M., Uzol, O., "A Comperative Study of Yield Assessment Using Data from an Operational Wind Farm and the Predictions Obtained Using Wind Atlas Methodology And CFD Calculations", The Science of Making Torque from Wind, Oldenburg, Germany, October 9-11 2012.

Leblebici, E., Ahmet, G., Tuncer, İ. H., "Atmospheric Turbulent Flow Solutions Coupled with a Mesoscale Weather Prediction Model", The Science of Making Torque from Wind, Oldenburg, Germany, October 9-11 2012.

Kayran, A., İbrahimoğlu, C. S., "Semi-geodesic Winding of Composite Coniacl Shells, Possible Application of Wind Turbine Tower Manufacturing", The Science of Making Torque from Wind, Oldenburg, Germany, October 9-11 2012.

Uzol, N. S., Uzol, O., "Free-wake Calculations of Wind Turbine Wake-Rotor Interactions: The Effect of Wortex Filament Core Size, Expansion and Stretching on Performance Predictions", The Science of Making Torque from Wind, Oldenburg, Germany, October 9-11 2012.

Gozluklu B. , Coker D., "Modeling of dynamic delamination in L-shaped composite brackets", Congress of American Society of Mechanical Engineers (ASME), IMECE2012-87831, Houston, USA, 2012.

Yavas, D., Gozluklu, B., Coker, D., "Failure mode transition during delamination of thick unidirectional L-shaped composite materials", Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition, Houston, Texas, USA, November 9-15, 2012.

Yavas, D., Uyar, I., Gozluklu, B., Coker, D., "Experimental and computational investigation of debonding at the interface of two I-shaped polycarbonate plates", Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition, Houston, Texas, USA, November 9-15, 2012.

Gozluklu B, Coker D, "Modeling of dynamic delamination in L-shaped composite brackets", 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) J. Eberhardsteiner et.al. (eds.) Vienna, Austria, September 10-14, 2012.

Gozluklu, B., Yavas, D., Coker, D., "Effect of thickness and pre-crack length on delamination of unidirectional L-shaped laminated composites", European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) , Vienna, Austria, September 10-14, 2012.

Çelik B, Kurtulus B., Eltez A, Giese B.L, Kurtulus D.F.," Assessment of wind energy strategy in Mugla Region (Turkey)", International Renewable Energy Storage Conference/ Berlin EUROSOLAR 28-30 November 2011.

Polat, O., Sezer-Uzol, N., and Tuncer, I.H., "Aerodynamic Optimization Of Horizontal Axis Wind Turbines Based On Potential Flow Solutions With BEM Theory And Genetic Algorithm," ECCOMAS CFD & OPTIMIZATION 2011 - 064, An ECCOMAS Thematic Conference, Antalya, TURKEY, 23-25 May 2011.

Elfarra, M.A., Akmandor, I.S., and Sezer-Uzol, N., "Pitch Angle Design of NREL VI Wind Turbine Blade," ECCOMAS CFD & OPTIMIZATION 2011 - 052, An ECCOMAS Thematic Conference, Antalya, TURKEY, 23-25 May 2011.

Elfarra, M.A., Akmandor, I.S., and Sezer-Uzol, N., "Investigation and Optimization of Winglets for HAWT Rotor Blades," ETC 2011, 9th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Istanbul, Turkey, 21-25 March 2011.

Elfarra, M.A., Sezer-Uzol, N., and Akmandor, I.S., "Investigations on Tangential Tip Tilting for HAWT Rotor Blades," 10th International Conference on Clean Energy, ICCE-2010, Famagusta, North Cyprus, 15-17 September 2010.

Sağol, E., Sezer-Uzol, N., and Uzol, O., "Site Specific Cost-Effective Design Optimization of A Horizontal Axis Wind Turbine," NUYEK 2009, Nuclear & Renewable Energy Sources with International Participation, Ankara, 28-29 September 2009.

Ceyhan, O., Ortakaya, Y., Korkem, B., Sezer-Uzol, N. and Tuncer, I.H., "Optimization of Horizontal Axis Wind Turbines by using BEM Theory and Genetic Algorithm", 5th Ankara International Aerospace Conference, METU Ankara, TURKEY, 17-19 August 2009.

Ozan Kesikbaş, "Investigations of Upscaling Effects for Aerodynamic Design of Large Wind Turbine Rotors by Using BEM Theory and Optimization," MS Thesis, Dept. of Aerospace Engineering, METU, December 2019. Supervisor: Assoc. Prof. Dr. Nilay Sezer Uzol.

Keriman Oğuz, "Aerodynamic Optimization of Horizontal Axis Wind Turbine Blades by Using CST Method, BEM Theory and Genetic Algorithm," MS Thesis, Dept. of Aerospace Engineering, METU, September 2019. Supervisor: Assoc. Prof. Dr. Nilay Sezer Uzol.

Sinan Bilgen, "Investigation of Aerodynamic and Structural Features of Twisting Tall Buildings," MS Thesis, Dept. of Architecture Engineering, METU, September 2019. Supervisor: Asst. Prof. Dr. Bekir Özer Ay, Co-Supervisor: Assoc. Prof. Dr. Nilay Sezer Uzol.

Siamak Pourkeivannour, "A Hardware-in-the-loop Simulator Development for Wind Energy Conversion Studies", MS Thesis, Dept. of Electrical and Electronics Engineering, METU, Sept 2019. Supervisor: Prof. Dr. Bülent Ertan.

Burcu Taşdemir, "Fatigue and Static Behavior of Curved Composite Laminates", MS Thesis, Dept. of Aerospace Engineering, METU, May 2018. Supervisor: Doç. Dr. Demirkan Çöker.

Meltem Özyıldız, "Finite Element Modelling of a Composite Wind Turbine Blade with Fully-Bonded and and Partically Unbonded Trailing Edge", MS Thesis, Dept. of Aerospace Engineering, METU, June 2018. Supervisor: Doç. Dr. Demirkan Çöker.

Umur Limon, "Actuator Load Calculation Tool for a Multiaxial Test System of a Rotating Beam Like Aerostructure", MS Thesis, Dept. of Aerospace Engineering, METU, Dec 2018. Supervisor: Doç. Dr. Demirkan Çöker.

Şener, Özgün. "Determination of the bending-twisting coupling in composite structures via digital image correlation (DIC) method and exploiting bending-twisting coupling in turbine blades for load alleviation in horizontal axis wind turbines", Yüksek Lisans Tezi, ODTÜ, Havacılık ve Uzay Müh., Danışman: Prof. Dr. Altan Kayran, Eylül 2017.

Ostovan, Yaşar., "Winglets for wind turbines: An experimental study on aerodynamic performance and tip vortex behavior", Doktora Tezi, ODTÜ, Havacılık ve Uzay Müh., Danışman: Doç. Dr. Oğuz Uzol, Ekim 2017.

Sevine, Tansu, "Reconstruction of atmospheric flows based on proper orthogonal decomposition method", Yüksek Lisans tezi, ODTÜ Havacılık ve Uzay Müh., Danışman: Prof. Dr. İsmail H. Tuncer, Eş-Danışman: Yard. Doç. Dr. Mustafa Kaya, Ocak 2017.

Reza Zeinali, "Design and Optimization of High Torque Density Generator for Direct Drive Wind Turbine Applications", MS Thesis, METU, September 2016.

Ahmet, G., PhD Thesis, "Micro-siting of wind turbines using navier-stokes solutions coupled with a numerical weather prediction model", PhD Thesis, METU Dept. of Aerospace Engineering, September 2014, Supervisor Prof. Dr. İsmail H. Tuncer.

Gözcü, M. O., "Investigation of the effect of bending twisting coupling on the loads in wind turbines with superelement blade definition", MS Thesis, METU Dept. of Aerospace Engineering, July 2014, Supervisor Prof. Dr. Altan Kayran.

Sargın, H., "Comparative study of transient and quasi-steady aeroelastic analysis of composite wind turbine blade in steady wind conditions", MS Thesis, METU Dept. of Aerospace Engineering, February 2014, Supervisor Prof. Dr. Altan Kayran.

Arca, M. A., "Strengthening of L-shaped Composite Laminates Using Carbon Nanotubes Reinforcement ad Thin Ply Non-crimp Fabrics", Master Thesis, METU Dept. of Aerospace Engineering, September 2014, Supervisor Assoc. Prof. Dr. Demirkan Çöker.

Uyar, İ., "Experimental and Computational Investigation of Crack Growth Along Curved Interfaces", Master Thesis, METU Dept. of Aerospace Engineering, September 2014, Supervisor Assoc. Prof. Dr. Demirkan Çöker.

Abdulrahim, A., "Experimental investigation of the effects of tip-injection on the aerodynamic loads and wake characteristics of a model horizontal axis wind turbine rotor", Master Thesis, METU Dept. of Aerospace Engineering, September 2014, Supervisor Assoc. Prof. Dr. Oğuz Uzol.

Gül, M., "An experimental study on boundary layer separation control over S809 airfoil using synthetic jet actuators", MS Thesis, METU Dept. of Aerospace Engineering, September 2013, Supervisor Assoc. Prof. Dr. Oğuz Uzol.

Özdede, S., "Wind resource assessment and wind farm modeling in complex terrain: Bodrum Peninsula case study using computational fluid dynamics", MS Thesis, METU Dept. of Aerospace Engineering, September 2013, Supervisor Assoc. Prof. Dr. Funda Kurtuluş.

Yavaş, D., "Experimental and computational investigation of crack growth along curved interfaces", MS Thesis, METU Dept. of Aerospace Engineering, July 2013, Supervisor Assoc. Prof. Dr. Demirkan Çöker.

Amireghbali, A., "Elastic analysis of a circumferential crack in an isotropic curved beam using modified mapping-collocation method", MS Thesis, METU Dept. of Aerospace Engineering, February 2013, Supervisor Assoc. Prof. Dr. Demirkan Çöker.

Iman, A.A., "Experimental and numerical investigation of the wind effects on long span bridge decks", MS Thesis, METU Dept. of Aerospace Engineering, 2011, Supervisor Asst. Prof. Dr. Oğuz Uzol, Co-Supervisor Asst. Prof. Dr. Özgür Kurç.

Elfarra,M., "Horizontal axis wind turbine rotor blade: Winglet and twist aerodynamic design and optimization using CFD", PhD Thesis, METU Dept. of Aerospace Engineering, 2011. Supervisor Prof. Dr. İ. Sinan Akmandor, Co-supervisor: Asst. Prof. Dr.Nilay Sezer Uzol.

Polat, Ö., "Genetic algorithm based aerodynamic shape optimization of wind turbine rotor blades using a 2-D panel method with a boundary layer solver" MS Thesis, METU Dept. of Aerospace Engineering, 2011. Supervisor Prof. Dr. İsmail H. Tuncer, Co-supervisor: Asst. Prof. Dr. Nilay Sezer Uzol.

Sağol, E., "Site specific design optimization of a horizontal axis wind turbine based on minimum cost of energy", MS Thesis, METU Dept. of Aerospace Engineering, 2010, Supervisor Asst. Prof. Dr. Oguz Uzol, Co-supervisor: Asst. Prof. Dr. Nilay Sezer Uzol.

Ceyhan, Ö., "Aerodynamic design and optimization of horizontal axis wind turbines by using Bem Theory and genetic algorithm", MS Thesis, METU Dept. of Aerospace Engineering, 2008. Supervisor Prof. Dr. İsmail H. Tuncer, Co-supervisor: Asst. Prof. Dr. Nilay Sezer Uzol.